Zippo Flints & Wicks Co-Pack

Worth: $3.49
(as of Aug 29,2022 22:37:57 UTC – Particulars)

From the producer

Flint & Wick Co-pack

Get your entire lighter tune up necessities with this co-pack.

3 particular person flint playing cards
3 particular person wick playing cards
Matches all zippo windproof lighters

Wick

Zippo’s real wick will hold your windproof lighter working at optimum efficiency. Is available in a sealed packaged.

1 wick per bundle
Matches all Zippo windproof lighters
Measurements: 100mm (4 inches)

Flint

Zippo’s real flints will hold your lighter working at optimum efficiency. Every flint card comes with a 6 flint dispenser.

6 real flints dispenser
Matches all Zippo windproof lighters

Flint & Wick Co-pack

Wick

Flint

Trimming the Wick

Step 1: First, gently pull up the wick utilizing tweezers or pliers till the clear wick seems. Pull from as far down as attainable to keep away from ripping the wick.

Step 2: Utilizing scissors or wire cutters trim the wick. This needs to be carried out a few times per yr for optimum efficiency. After 2-3 trimmings the wick needs to be changed.

Changing the Wick

Step 1

First, take away all elements from the underside of the lighter insert; flint screw, felt pad, packing materials, and the previous wick. To switch the wick, insert a brand new wick both downward by means of the chimney or by means of the underside of the lighter insert.

Step 2

Subsequent, bend the highest portion of the wick over the chimney to carry it on place throughout meeting. Then, rigorously reinstall the packing materials in the identical order it was taken out. As you’re reinstalling in small items weave the wick between the padding in an ‘S’ sample.

Step 3

Reinstall the felt pads over the flint tube and safe it with the flint spring. Make certain the flint doesn’t fall out throughout this course of.

Step 4

As soon as your elements are reinstalled put the insert again into the case and trim the wick. The lighter is able to go.

Changing the Flint

Step 1

First take away the insert from the lighter case. Utilizing a small screw driver or a coin, slowly take away the spring. The spring has pressure so make certain it does not fly away.

Step 2

Take away the remaining piece of flint by gently tapping the insert in opposition to a tough floor. As soon as it’s eliminated, use an unfolded paper clip to take away any cussed flint slivers or residue from the flint tube. Insert a brand new flint into the flint tube.

Step 3

Change the flint spring and switch clockwise till tight. If the screw is not totally tightened the lid won’t shut.

Step 4

After totally tightening the spring you might wish to hold further flints below the felt pad so that you at all times have them helpful for future use. Put the insert again into the lighter case and ensure the lid can totally shut. if the flint wheel binds, flip the wheel backwards just a few instances.

1 wick per bundle
Matches all Zippo windproof Lighters
Measurements: 100mm/4 inches
Change when the wick in your Zippo windproof lighter turns into Black from Carbon
To switch the wick pull the wick up with pliers till clear wick seems; reduce it off even with high of chimney and straighten the wick within the chimney