Zippo Flints & Wicks Co-Pack

Worth: $7.39
(as of Aug 29,2022 18:01:21 UTC – Particulars)

From the producer

Flint & Wick Co-pack

Get your whole lighter tune up necessities with this co-pack.

3 particular person flint playing cards
3 particular person wick playing cards
Suits all zippo windproof lighters

Wick

Zippo’s real wick will maintain your windproof lighter working at optimum efficiency. Is available in a sealed packaged.

1 wick per package deal
Suits all Zippo windproof lighters
Measurements: 100mm (4 inches)

Flint

Zippo’s real flints will maintain your lighter working at optimum efficiency. Every flint card comes with a 6 flint dispenser.

6 real flints dispenser
Suits all Zippo windproof lighters

Flint & Wick Co-pack

Wick

Flint

Trimming the Wick

Step 1: First, gently pull up the wick utilizing tweezers or pliers till the clear wick seems. Pull from as far down as potential to keep away from ripping the wick.

Step 2: Utilizing scissors or wire cutters trim the wick. This ought to be carried out a few times per yr for optimum efficiency. After 2-3 trimmings the wick ought to be changed.

Changing the Wick

Step 1

First, take away all parts from the underside of the lighter insert; flint screw, felt pad, packing materials, and the previous wick. To interchange the wick, insert a brand new wick both downward by the chimney or by the underside of the lighter insert.

Step 2

Subsequent, bend the highest portion of the wick over the chimney to carry it on place throughout meeting. Then, fastidiously reinstall the packing materials in the identical order it was taken out. As you’re reinstalling in small items weave the wick between the padding in an ‘S’ sample.

Step 3

Reinstall the felt pads over the flint tube and safe it with the flint spring. Be certain the flint doesn’t fall out throughout this course of.

Step 4

As soon as your parts are reinstalled put the insert again into the case and trim the wick. The lighter is able to go.

Changing the Flint

Step 1

First take away the insert from the lighter case. Utilizing a small screw driver or a coin, slowly take away the spring. The spring has pressure so ensure it would not fly away.

Step 2

Take away the remaining piece of flint by gently tapping the insert towards a tough floor. As soon as it’s eliminated, use an unfolded paper clip to take away any cussed flint slivers or residue from the flint tube. Insert a brand new flint into the flint tube.

Step 3

Substitute the flint spring and switch clockwise till tight. If the screw is not absolutely tightened the lid is not going to shut.

Step 4

After absolutely tightening the spring you could wish to maintain further flints underneath the felt pad so that you all the time have them helpful for future use. Put the insert again into the lighter case and ensure the lid can absolutely shut. if the flint wheel binds, flip the wheel backwards a number of occasions.